EasyManuals Logo

Hitachi SJ700B SERIES User Manual

Hitachi SJ700B SERIES
275 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #168 background imageLoading...
Page #168 background image
Chapter 4 Explanation of Functions
4 - 109
4.3.16 Zero-return function (ORG, ORL)
- One of three types of zero-return operations can be selected by zero-return mode selection (P068).
When a zero-return operation ends, the current position counter is cleared (to 0).
- Use zero-return direction selection (P069) to select the direction of zero-return operation.
- If zero-return operation is not performed, position control is performed based on the assumption that the
motor position detected at power-on is the origin.
<1> Low-speed zero-return
(1) The inverter accelerates the motor for
the specified acceleration time to the
low-speed zero-return speed.
(2) The inverter runs the motor at the
low-speed zero-return speed.
(3) The inverter performs positioning
when the ORL signal is input.
<2> High-speed zero-return
<1> The inverter accelerates the motor
for the specified acceleration time to the
high-speed zero-return speed.
<2> The inverter runs the motor at the
high-speed zero-return speed.
<3> The inverter starts deceleration
when the ORL signal is turned on.
<4> The inverter runs the motor in the
reverse direction at the low-speed
zero-return speed.
<5> The inverter performs positioning
when the ORL signal is turned off.
<3> High-speed zero-return 2
<1> The inverter accelerates the
motor for the specified acceleration
time to the high-speed zero-return
speed.
<2> The inverter runs the motor at the
high-speed zero-return speed.
<3> The inverter starts deceleration
when the ORL signal is turned on.
<4> The inverter runs the motor in the
reverse direction at the low-speed
zero-return speed.
<5> The inverter starts deceleration
when the ORL signal is turned off.
<6> The inverter runs the motor in the
forward direction at the low-speed
zero-return speed.
<7> The inverter performs positioning at the first Z pulse position after the ORL signal is turned on.
ORG terminal
ORL terminal
ON
ON
(1)
(2)
(3)
Low-speed zero-return speed
(P070)
Output frequency
Position
Origin
(1)
(2)
(3)
(4)
(5)
High-speed zero-return
speed (P071)
O
ORG terminal
ORL terminal
ON
ON
Low-speed zero-return speed
(P070)
Output frequency
Position
Origin
(1)
(2)
(3)
(4) (5)
(6) (7)
ORG terminal
ORL terminal
ON
ON
Low-speed zero-return speed
(P070)
Output frequency
Position
Origin
high-speed zero-return speed
(P071)
Z pulse

Table of Contents

Other manuals for Hitachi SJ700B SERIES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi SJ700B SERIES and is the answer not in the manual?

Hitachi SJ700B SERIES Specifications

General IconGeneral
BrandHitachi
ModelSJ700B SERIES
CategoryInverter
LanguageEnglish

Related product manuals