Chapter 5 Error Codes
5 - 12
Name
Display on
digital
operator
Display on
remote
operator
055HFF～150HFF 185HFF～550HFF
Gate array com-
munication error
Phase loss input
protection
Use the control circuit terminal for resetting, press the
STOP/RESET key of the digital operator or turn on/off the
power of inverter
Main circuit error
Turn on/off the power of inverter
IGBT error
Turn on/off the power of
inverter
Use the control circuit terminal
for resetting, press the
STOP/RESET key of the digital
operator or turn on/off the power
of inverter
Thermistor error
Braking error
Emergency stop
Low-speed over-
load protection
Modbus com-
munication error
Option 1 error
Option 2 error
Use the control circuit terminal for resetting, press the
STOP/RESET key of the digital operator or turn on/off the
power of inverter
Waiting in under-
voltage status
Self resetting when input voltage satisfy the condition
Communication
error
Self resetting when operator communication is normal and turn
on/off the power
Waiting for retry
Display will be normal after standby mode ended
Power-off
-
Restricted
operation
command
Display will be normal after run command is normal
Initialization
(Rotation display)
Display will be normal after initialization ended
Empty trip history
-
？
To Next Page
Loading...
