Hitachi SJ700B SERIES - Page 265

Chapter 8 List of Data Settings
8 - 12
Code Function name Monitored data or setting Default
Setting
during
operation
(allowed or
not)
Change
during
operation
(allowed or
not)
Page
Ter mi nal
C111 Overload setting (2) 0.0 to 1.50 x "rated current" (A)
Rated
current of
inverter
{ {
4-40
C121 [O] input zero calibration 0. to 9999., 1000 to 6553 (10000 to 65530)
Factory
setting
{ {
C122 [OI] input zero calibration 0. to 9999., 1000 to 6553 (10000 to 65530)
Factory
setting
{ {
Adjustment
C123 [O2] input zero calibration 0. to 9999., 1000 to 6553 (10000 to 65530)
Factory
setting
{ {
-
C130 Output 11 on-delay time 0.0 to 100.0 (s) 0.0
¯ {
C131 Output 11 off-delay time 0.0 to 100.0 (s) 0.0
¯ {
C132 Output 12 on-delay time 0.0 to 100.0 (s) 0.0
¯ {
C133 Output 12 off-delay time 0.0 to 100.0 (s) 0.0
¯ {
C134 Output 13 on-delay time 0.0 to 100.0 (s) 0.0
¯ {
C135 Output 13 off-delay time 0.0 to 100.0 (s) 0.0
¯ {
C136 Output 14 on-delay time 0.0 to 100.0 (s) 0.0
¯ {
C137 Output 14 off-delay time 0.0 to 100.0 (s) 0.0
¯ {
C138 Output 15 on-delay time 0.0 to 100.0 (s) 0.0
¯ {
C139 Output 15 off-delay time 0.0 to 100.0 (s) 0.0
¯ {
C140 Output RY on-delay time 0.0 to 100.0 (s) 0.0
¯ {
C141 Output RY off-delay time 0.0 to 100.0 (s) 0.0
¯ {
C142 Logical output signal 1 selection 1 Same as the settings of C021 to C026 (except those of LOG1 to LOG6) 00
¯ {
C143 Logical output signal 1 selection 2 Same as the settings of C021 to C026 (except those of LOG1 to LOG6) 00
¯ {
4-72
C144 Logical output signal 1 operator selection 00 (AND), 01 (OR), 02 (XOR) 00
¯ {
C145 Logical output signal 2 selection 1 Same as the settings of C021 to C026 (except those of LOG1 to LOG6) 00
¯ {
C146 Logical output signal 2 selection 2 Same as the settings of C021 to C026 (except those of LOG1 to LOG6) 00
¯ {
C147 Logical output signal 2 operator selection 00 (AND), 01 (OR), 02 (XOR) 00
¯ {
C148 Logical output signal 3 selection 1 Same as the settings of C021 to C026 (except those of LOG1 to LOG6) 00
¯ {
C149 Logical output signal 3 selection 2 Same as the settings of C021 to C026 (except those of LOG1 to LOG6) 00
¯ {
C150 Logical output signal 3 operator selection 00 (AND), 01 (OR), 02 (XOR) 00
¯ {
C151 Logical output signal 4 selection 1 Same as the settings of C021 to C026 (except those of LOG1 to LOG6) 00
¯ {
C152 Logical output signal 4 selection 2 Same as the settings of C021 to C026 (except those of LOG1 to LOG6) 00
¯ {
C153 Logical output signal 4 operator selection 00 (AND), 01 (OR), 02 (XOR) 00
¯ {
C154 Logical output signal 5 selection 1 Same as the settings of C021 to C026 (except those of LOG1 to LOG6) 00
¯ {
C155 Logical output signal 5 selection 2 Same as the settings of C021 to C026 (except those of LOG1 to LOG6) 00
¯ {
C156 Logical output signal 5 operator selection 00 (AND), 01 (OR), 02 (XOR) 00
¯ {
C157 Logical output signal 6 selection 1 Same as the settings of C021 to C026 (except those of LOG1 to LOG6) 00
¯ {
C158 Logical output signal 6 selection 2 Same as the settings of C021 to C026 (except those of LOG1 to LOG6) 00
¯ {
Output terminal operation function
C159 Logical output signal 6 operator selection 00 (AND), 01 (OR), 02 (XOR) 00
¯ {
4-66
C160 Input terminal response time setting 1 0. to 200. ( ¯2ms) 1
¯ {
C161 Input terminal response time setting 2 0. to 200. ( ¯2ms) 1
¯ {
C162 Input terminal response time setting 3 0. to 200. ( ¯2ms) 1
¯ {
C163 Input terminal response time setting 4 0. to 200. ( ¯2ms) 1
¯ {
C164 Input terminal response time setting 5 0. to 200. ( ¯2ms) 1
¯ {
C165 Input terminal response time setting 6 0. to 200. ( ¯2ms) 1
¯ {
C166 Input terminal response time setting 7 0. to 200. ( ¯2ms) 1
¯ {
C167 Input terminal response time setting 8 0. to 200. ( ¯2ms) 1
¯ {
Input terminal response
C168 Input terminal response time setting FW 0. to 200. ( ¯2ms) 1
¯ {
4-72
Other
C169
Multistage speed/position determination
time
0. to 200. ( ¯10ms) 0
¯ {
4-48
4-108