Hitachi SJ700B SERIES - Page 267

Chapter 8 List of Data Settings
8 - 14
Code Function name Monitored data or setting Default
Setting
during
operation
(allowed or
not)
Change
during
operation
(allowed or
not)
Page
H050 PI proportional gain for 1st motor 0.0 to 999.9, 1000. 100.0
{ {
H250 PI proportional gain for 2nd motor 0.0 to 999.9, 1000. 100.0
{ {
H051 PI integral gain for 1st motor 0.0 to 999.9, 1000. 100.0
{ {
H251 PI integral gain for 2nd motor 0.0 to 999.9, 1000. 100.0
{ {
H052
P proportional gain setting for 1st
motor
0.01 to 10.00 1.00
{ {
H252
P proportional gain setting for 2nd
motor
0.01 to 10.00 1.00
{ {
H060 Zero LV lmit for 1st motor 0.0 to 70.0 70.0
{ {
H260 Zero LV lmit for 2nd motor 0.0 to 70.0 70.0
{ {
4-58
H061
Zero LV starting boost current for 1st
motor
0. to 50. (%) 50.
{ {
H261
Zero LV starting boost current for 2nd
motor
0. to 50. (%) 50.
{ {
4-90
H070
Terminal selection PI proportional
gain setting
0.0 to 999.9, 1000. 100.0
{ {
H071
Terminal selection PI integral gain
setting
0.0 to 999.9, 1000. 100.0
{ {
H072
Terminal selection P proportional
gain setting
0.00 to 10.00 1.00
{ {
Control constants
H073 Gain switching time 0. to 9999. (ms) 100.
{ {
4-58