Chapter 2 Installation and Wiring
2 - 16
Reference: Leakage current by inverter with model EMC filter enabled or disabled (reference data)
The table below lists the reference currents that may leak from the inverter when the internal EMC filter is enabled or disabled.
(Leakage current is in proportion to the voltage and frequency of input power.)
Note that the values listed in the table below indicate the reference currents leaking from the inverter alone. The values exclude
current leakage from external devices and equipment (e.g., power cables).
.
400 V class model (input power: 400 VAC, 50 Hz)
5.5kW
7.5kW～
15kW
18.5kW～
45kW
55kW
Internal EMC filter enabled
Ca.5mA Ca.95mA Ca.56mA Ca.56mA
Internal EMC filter disabled
Ca.0.2mA Ca.0.2mA Ca.0.2mA C a.0.2mA
To Next Page
Loading...
