Hitachi Unified Storage VM Product Overview Guide
viii
Preface
Safety and environmental information
Intended audience
This document is intended for system administrators, Hitachi Data Systems
representatives, and authorized service providers who install, configure,
and operate the Hitachi Unified Storage VM storage system.
Readers of this document should be familiar with the following:
• Data processing and RAID storage systems and their basic functions.
• The Hitachi Unified Storage VM storage system and the Hitachi Unified
Storage VM Block Module Hardware User Guide.
• The Storage Navigator software for the Hitachi Unified Storage VM
storage system and the Hitachi Storage Navigator User Guide.
Release notes
The Hitachi Unified Storage VM Block Module Release Notes provide
information about the HUS VM block module microcode (DKCMAIN and
SVP). A second set of release notes provides information about the HUS VM
file module NAS operating system (SU and SMU). Each of the release notes
describe the new features, functions, and changes. Both release notes are
available on the Hitachi Data Systems Portal: https://portal.hds.com
Product version
This document revision applies to Hitachi Unified Storage VM firmware
version 73-03-0x and later.
Document revision level
Changes in this revision
• Changed the name of this document from Getting Started Guide to
Product Overview Guide
• Reorganized and rewrote the contents of this manual to fit the new
manual name.
Caution: Before operating or working on the Hitachi Unified Storage VM
storage system, read the safety and environmental information in the
Hitachi Unified Storage VM Block Module Hardware User Guide.
Revision Date Description
MK-92HM7003-00 September 2012 Initial release
MK-92HM7003-01 December 2012 Supersedes and replaces MK-92HM7003-00
MK-92HM7003-02 March 2013 Supersedes and replaces MK-92HM7005-01
MK-92HM7003-03 May 2013 Supersedes and replaces MK-92HM7005-02
MK-92HM7003-04 October 2013 Supersedes and replaces MK-92HM7005-03