Access requirements for Thin Image
The following table species the resource access requirements for Thin Image
operations.
Operation name Condition
Create LDEVs If LDEVs for Thin Image are created, the following must be
assigned to the Stor
age Administrator group that is
permitted to manage them.
■
LDEV ID
■
Pool VOL of the pool
Delete LDEVs If LDEVs for Thin Image are deleted, the following must be
assigned to the Storage Administrator group that is
permitted to manage them.
■
LDEV ID
■
Pool VOL of the pool
Create pools
Expand Pool
Volumes that are specied when creating or expanding
pools must be assigned to the Storage Administrator group
that is permitted to manage them.
All the volumes that are specied when creating pools must
belong to the same resource group.
Edit Pools
Delete Pools
Pool-VOLs of the specied pools must be assigned to the
Storage Administrator group that is permitted to manage
them.
Create pairs Both primary volumes and secondary volumes must be
assigned to the Storage Administrator group that is
permitted to manage them.
Split pairs Primary volumes must be assigned to the Storage
Administrator group that is permitted to manage them.
Suspend pairs
Resynchronize pairs
Release pairs
Access requirements for TrueCopy
The following table species the resource access requirements for TrueCopy operations.
Operation name Condition
Edit Ports Specied ports must be assigned to the user.
Access requirements for Thin Image
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 107
To Next Page
Loading...
