Hitachi Virtual Storage Platform G800 - Page 108

Operation name Condition
Add Remote Connection Specied initiator ports must be assigned to the user.
Edit Remote Connection
Options
Operation can be performed with no conditions.
Create Pairs Primary volumes must be assigned to the user.
Initiator ports of r
emote paths that are connected with the
primary volume in the remote storage must be assigned to
the user.
Split Pairs Specied primary volumes or secondary volumes must be
assigned to the user.
Resync Pairs Primary volumes must be assigned to the user.
Delete Pairs Specied volumes must be assigned to the user.
If primary volumes are specied, the initiator ports of
remote paths that are connected with the primary volume
in the remote storage must be assigned to the user.
Edit Pair Options Primary volumes must be assigned to the user.
Add Remote Paths Specied initiator ports must be assigned to the user.
Remove Remote Paths Specied initiator ports must be assigned to the user.
Edit Remote Connection
Options
Initiator ports of remote paths that are connected to a
specied remote storage must be assigned to the user.
Remove Remote
Connections
Initiator ports of remote paths that are connected to a
specied remote storage must be assigned to the user.
Force Delete Pairs Specied primary volumes or secondary volumes must be
assigned to the user.
Access requirements for global-active device
The following table species the resource access requirements for global-active device
operations.
Operation name Condition
Edit Ports Specied ports must be assigned to the user.
Add Remote Connection Specied initiator ports must be assigned to the user.
Edit Remote Connection
Options
Operation can be performed with no conditions.
Access requirements for global-active device
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 108