Getting Started
20
Note: Replace the batteries with 3V micro lithium cells such as Maxwell CR2025 or its
equivalent.
Note: Dispose of battery safely in accordance with local laws. Do not dispose of in fire.
Note: Do not short circuit the batteries.
Note: Do not take apart the batteries.
Note: Do not hold the batteries with the metallic tweezers.
Note: Do not re-charge the batteries.
Note: Keep the batteries in a dark, cool, dry place.
Camcorder Batteries
4
Using Battery Pack
Before you install the battery for the first time it must be fully charged. Refer to "Charging the
Battery" for details.
1. Lift the OPEN lever and pull it up. The power supply attachment cover will open.
2. Insert the battery into the attachment holder, aligning it with the "( )" mark on the
camcorder.
3. Press the center of the battery and hold it, then slide it in the direction of the arrow.
4. After installing the battery, close the cover. Hold the OPEN lever and align the tabs on both
sides of the cover with the end of the attachment holder.
Note: If the OPEN lever is flat, the cover will not close.
To Next Page
Loading...
Need help?
General
