Getting Started
32
Note: When " TITLE" is displayed in the viewfinder, the title cannot be turned on or off
using the remote control. To insert the title during recording, press the DATE/TITLE button
on the camcorder so that " TITLE" disappears. (The remote control is optional for VM-
E110A.)
Using the Linear Time Counter
The linear time counter displays the tape run in hours, minutes, and seconds helping
you to keep track of how long you've been filming or time you have left to film before
running out of tape.
Turn the camcorder on to display the linear time counter. The linear time counter keeps
track from when you load a cassette into the camcorder and clears to 0:00:00 when the
cassette is ejected.
Using the Display Button (The remote control is optional for VM-E110A)
Pressing the DISPLAY button on the remote control allows you to switch the displays in
the viewfinder. When the camcorder is turned on, the linear time counter appears.
Pressing the DISPLAY button once displays the linear time counter with the memory
feature.
When a recorded tape is in the camcorder during the VIDEO mode, "SEARCH"
appears in the viewfinder. (Refer to "Date Search" on page 23.)
Pressing the DISPLAY button a second time returns to the linear time counter.
To Next Page
Loading...
Need help?
General
