:: POWER SOURCES
NOTES:
' This AC adapter/charger is universal around the world. !f YOUuse the camera/recorder in
,_ _ i_ Z!ZIZ i i Z_ ZII _ ZI I ZIII IZII ZZ I Z I i ii i ii I Z Zili ii ZII I_ZZZ _IZZZZ
* when Using the AC adapter/charger to power the camera/recorder, the battery level
indicator may display m'u This indicator is Used for batten operation and hasno
meaning when using the Ac adapter/charger to power the camera/recorder:
WHEN USING WITH THE CAR BATTERY (By using optional car battery cord Hitachi
VM-CCa0A)
1. Connect the car battery cord to the car's cigarette lighter socket.
2. Open the case.
Refer to "WATER-RESISTANT" on page 8.
3. Connect one end of the DC cord (provided) to the DC Input (6V) jack of the
camera/recorder.
4. Connect the other end of the DC cord to the "DC OUTPUT" of the car battery cord.
* The car battery cord is designed to be used only with automobiles having a12!24-volt
negative ground system.
, To prevent fire or shock hazard or damage to your camera/recorder, please use on!y
Hitachi's car battery cord model VM-CCa0A:
Z ZZ Z Z Z Z ZZ Z Z ZZ Z Z ZZ Z Z ZZZZ
NOTE: Be sure tO turn off power of the cameraireCorder when attaChing or detaching a
rower supply (battery, NO adapter/charger, etc.) to the camera/recorder:
To Next Page
Loading...
