Important For important information and instructions about connecting to hosts, refer to the Open-Systems Host
Attachment Guide.
Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. Using the appropriate cable, connect the iSCSI data ports on each storage system controller to your Gigabit
Ethernet network switch.
Item Description
1 Copper iSCSI ports (require Ethernet LAN cables with RJ-45 connectors)
2 Optical iSCSI ports (require fiber cables)
2. Connect your Gigabit Ethernet network switch to the NIC or HBA card in each host computer or server.
Parent Topic
• Step 7: Make host connections
Step 8: Register your storage system with Hitachi Vantara support
If you have not already registered for access to Hitachi Support Connect, do so now. Otherwise, you will not be able to
download and install Hi-Track Remote Monitoring system, and you will encounter delays in getting your storage system
running and supported.
Before you begin
• If you do not yet have a Support Connect account, register on Support Connect. For details, click here.
Procedure
https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF700_GF900/88-03-0x/Installation/0…
Updated: Wed, 20 Dec 2023 21:36:41 GMT
Powered by
24
To Next Page
Loading...
