Parent Topic
• Installing your VSP G/F350 and VSP G/F370 storage system
Child Topics
• Cabling Fibre Channel ports
• Cabling iSCSI ports
Cabling Fibre Channel ports
Each controller supports 8/16/32-Gbps Fibre Channel connectivity to host computers using LC-LC optical cables
connected to a Fibre Channel switch. To eliminate single paths of failure, connect the ports on each controller to
separate switches for redundancy.
Important For important information and instructions about connecting to hosts, refer to the Open-Systems Host
Attachment Guide.
Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. Connect the Fibre Channel data ports on each storage system controller to your Fibre Channel switch.
2. Connect your Fibre Channel switch to the Fibre Channel HBA card in each host computer or server.
Parent Topic
• Step 7: Make host connections
Cabling iSCSI ports
Each controller supports 10-gigabit Ethernet copper (RJ-45) or optical (fiber) iSCSI connectivity to your data network.
https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF700_GF900/88-03-0x/Installation/0…
Updated: Wed, 20 Dec 2023 21:36:41 GMT
Powered by
23
To Next Page
Loading...
