Hitachi VSP G/F350 User Manual (English)

To Next Page

Installing your VSP G/F350 and VSP G/F370 storage system

Hitachi Virtual Storage Platform G/F350 and G/F370 storage systems are designed for self-installation, so you can set

up your storage system for the first time without assistance from a Hitachi Vantara representative.

Child Topics

• Step 1: Unpack the storage system

• Step 2: Install the storage system into a rack

• Step 3: Connect the storage system to power

• Step 4: Cable a management console

A customer-supplied computer is used to set up and manage your storage system.

• Step 5: Power on the storage system

• Step 6: Perform the initial setup

Initial setup of the storage system is performed using the Windows-based management console.

• Step 7: Make host connections

• Step 8: Register your storage system with Hitachi Vantara support

If you have not already registered for access to Hitachi Support Connect, do so now. Otherwise, you will not be

able to download and install Hi-Track Remote Monitoring system, and you will encounter delays in getting your

storage system running and supported.

• Step 9: Install Hi-Track Remote Monitoring system

• Where to go from here

After concluding the self-installation successfully, perform the following post-installation activities.

Step 1: Unpack the storage system

Before you begin

Make sure your data center meets all site preparation requirements before you install the storage system. In addition, if

you are not using a Hitachi Universal V2 rack, make sure the electrical specifications of your rack meet the power

requirements of the storage system.

Procedure

1. Inspect all materials for signs of damage. If you see damage, discontinue the installation and contact your Hitachi

https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF700_GF900/88-03-0x/Installation/0…

Updated: Wed, 20 Dec 2023 21:36:41 GMT

Need help?

Do you have a question about the Hitachi VSP G/F350 and is the answer not in the manual?

Hitachi VSP G/F350 Specifications

General

Model	VSP G/F350
Data Reduction Features	Deduplication, Compression
Form Factor	Rack-mountable
Operating Humidity	20% to 80% (non-condensing)
Category	Storage
Drive Types Supported	SSD, HDD
RAID Levels Supported	RAID 0, 1, 5, 6, 10
Controller Type	Dual Controller
Connectivity	FC, iSCSI, FCoE
Host Interface	16 Gbps FC, 10 Gbps iSCSI
Maximum Host Connectivity	128 hosts
High Availability Features	Redundant components
Management Software	Hitachi Command Suite
Power Supply	Redundant power supplies
Dimensions	Varies depending on configuration
Weight	Varies depending on configuration
Operating Temperature	10°C to 35°C
Installed Devices / Modules Qty	Varies depending on configuration