9. Find the washers, O-rings, and screws included with the bezel bracket mounting kit (part number
043-100885-01.P). Then install a washer, O-ring, and screw (one per side) between the mounting profile of the
rack and the mounting "ears" of the controller. The screw engages the threaded hole in the rail.
Item Description
1 Screw
2 O-ring
3 Washer
The rack installation for your controller should resemble the following figure.
Item Description
1 Washers, O-rings, and screws securing the controller to the front of the rack
Parent Topic
• Installing your VSP G/F350 and VSP G/F370 storage system
https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF700_GF900/88-03-0x/Installation/0…
Updated: Wed, 20 Dec 2023 21:36:41 GMT
Powered by
7
To Next Page
Loading...
