Cabling Fibre Channel ports
Each contr
oller supports 16-Gbps Fibre Channel connectivity to host computers using LC-
LC optical cables connected to a Fibre Channel switch. To eliminate single paths of
failure, connect the ports on each controller to separate switches for redundancy.
Important: For important information and instructions about connecting to
hosts, r
efer to the Open-Systems Host Attachment Guide.
Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. Connect the Fibre Channel data ports on each storage system controller to your
Fibre Channel switch.
Cabling Fibre Channel ports
Installing your storage system that includes an SVP
Hitachi Virtual Storage Platform G130 (with SVP) Installation Guide 23
To Next Page
Loading...
