c. In Computer on the Remote Desktop Connection windo
w, type the default
SVP IP address 10.0.0.100
d. In the lower left side of the window, click Show Options.
e. In User name, type SVP-PC\SVP
f. Click Connect.
g. When prompted to enter your credentials, type raid-login in Password, and
then click OK.
h. If prompted that the identity of the remote computer cannot be veried, click
Y
es to continue.
2. Double-click the Open StorageDeviceList shortcut on the desktop:
Stopping the storage system service
Installing your storage system that includes an SVP
Hitachi Virtual Storage Platform G130 (with SVP) Installation Guide 8
To Next Page
Loading...
