Attribute Description
Required /
Optional
Default
value
auth.radius.domain-
name.timeout
The number of seconds before the
connection to the LD
AP server
times out. Must be between 1 and
302.
Optional 10
auth.radius.domain-
name.retry.interval
Retry interval in seconds when the
connection to the LDAP server fails.
Must be between 1 and 5.
2
Optional 1
auth.radius.domain-
name.retry.times
Retry times when the connection to
the LDAP server fails. Must be
between 0 and 3. 0 means no retry.
2
Optional 3
Notes:
1. The item can be omitted if true is speciî ´ed for "auth.ldap.server-
name.dns_lookup".
2. If the speciî ´ed value is not valid, the default value will be used.
3. To use symbols such as + ; , < = and >, enter a backslash (\) before each symbol.
When using multiple symbols, each symbol must have a backslash before it. For
example, to enter abc++ in the searchdn î ´eld, use \+ instead of + as shown here:
abc\+\+
To enter \ , /, or ", enter a backslash and then the ASCII code in hex for these
symbols.
â– Enter \5c for \.
â– Enter \2f for /.
â– Enter \22 for "
For example, to enter abc\ in the searchdn î ´eld, enter abc\5c.
Creating a Kerberos configuration file
You can use a Kerberos server for authentication on your storage system.
To use a Kerberos server for authentication, create a conî ´guration
î ´le in UTF-8 encoding.
Include information about the authentication server as shown in the following example.
Any î ´le name and extension are allowed. If an authorization server is not used, you do
not need to deî ´ne the items for it.
Caution: If you save the conî ´guration
î ´le when using the Windows standard
Notepad application, specify ANSI for the letter code. If you use an editor
other than the memo pad and have the YTF-8 BOM setting, specify No BOM
then save.
auth.server.type=kerberos
a
uth.group.mapping=<value>
Creating a Kerberos conî ´guration î ´le
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 125
To Next Page
Loading...
Need help?
General