Hitachi VSP G400 System Administrator Guide

■
For the user gr
oups whose roles are other than the Storage Administrator, All
Resource Groups Assigned is automatically set to Yes. If you delete all the roles except
the Storage Administrator, reassign resource groups to the user group because All
Resource Groups Assigned is automatically set to No. To assign resource groups to
the user group, see
Changing assigned resource groups (on page 92) .
■
Security settings that aect
the entire system is congured by the administrator.
■
Resource group 10 is congured by user A.
■
Resource group 20 is congured by user B.
To implement the above conguration, assign the users to the user groups as shown
below.
User
User group to be
registered
Roles to be assigned to the
user group
Resource group to be
assigned to user
group
Adminis
tr
ator
user group 1 Security Administrator (View &
Modify)
All Resource Groups
Assigned
1
User A user group 10 Storage Administrator
2
Resource group 10
User B user group 20 Storage Administrator
2
Resource group 20
Notes:
1. For the user group that is assigned the Security Administrator role, All Resource
Groups Assigned is automatically set to Yes.
2. There are a few types of storage administrators. For more information, see
Roles
(on page 85) .
Roles
The following table shows all the roles that are available for use and the permissions that
each role provides to the users. You cannot create a custom role.
Role Capabilities
Security Administrator
(Vie
w Only)
■
Vie
wing information about user accounts and encryption settings
■
Viewing information about the encryption key in the key SVP
Roles
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 85

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English