- Introduction -
Thank you for your purchase of “WJ-PN (PROFINET communication option)”
This Quick Reference Guide (QRG) outlines the handling and maintenance of “WJ-PN.” Before
using the product, carefully read this QRG with the instruction manual of the inverter, and keep it
handy for quick reference of the operator and maintenance inspector. Read this QRG carefully and
follow the instructions exactly before installing, operating, maintenance and inspection.
Always keep various kinds of specifications mentioned in this QRG and use exactly. And make sure
to prevent trouble by correct inspection and maintenance. Make sure to deliver this QRG to the end
user.
- Usage of this QRG-
(1) Please understand that the mentioned items of this QRG may be changed without permission.
(2) All right reserved.
(3) Please understand, the functions that are not listed in this QRG shall mean "does not support it."
(4) If you find any incorrect descriptions, missing descriptions or have a question or inquiry
concerning the contents of this QRG, please contact your Hitachi distributor.
(5) Please understand that we hold no responsibility for any resulting effects, in spite of the above
mentioned contents.
- Trademark-
PROFINET is trade names of the non-profit organization PROFIBUS Nutzerorganisation e.V.(PNO).
- Reference-
Please refer to PROFINET concerning general information on the PROFIBUS and PROFINET
International (PI):
URL http://www.profibus.com/
- Operation guarantee -
This option conforms to PROFINET, but Hitachi Industrial Equipment Systems Co.,Ltd. cannot
guarantee that this option can be connected to all PROFINET IO controllers.
- WL200 -
WL200 is a product for Europe.
- Troubleshooting -
Please refer to chapter 9 in this QRG and the instruction manual of the PROFINET IO controller.
To Next Page
Loading...
Need help?
General
