Hitachi WJ200 Series - Page 55

Chapter 8 PROFINET Specification
49
● 953
Sub-Index
Item
Description
-
Name
Warning parameters
Data type
V2
Access
R
Default setting
0
Detail
This area displays the warning of WJ200 / WL200.
This parameter is same as d090 of WJ200 / WL200.
● 954
Sub-Index
Item
Description
-
Name
Warning parameters
Data type
V2
Access
R
Default setting
0
Detail
This area displays the warning of WJ-PN.
Please refer to “8.16 Warning” for details.
● 964
Sub-Index
Item
Description
Name
Drive Unit identification
Data type
ARRAY of UINT
Access
R
Detail
This area displays the information of WJ-PN.
0x00
Name
Manufacturer
Default setting
617
Detail
This area displays the vendor code.
0x01
Name
Drive Unit type
Default setting
0x0301
Detail
This area displays drive unit type code that is the device ID of
WJ-PN
0x02
Name
Version (Software)
Default setting
This value depends on shipment time.
Detail
This area displays software version of WJ-PN.
When version is xx.yy, this parameter is xxyy (decimal).
0x03
Name
Firmware date (year)
Default setting
This value depends on shipment time.
Detail
This area displays year (decimal) that firmware of WJ-PN was
created.
0x04
Name
Firmware date (day/month)
Default setting
This value depends on shipment time.
Detail
This area displays day/month (ddmm : decimal) that firmware of
WJ-PN was created.