Hitachi YUTAKI S COMBI Series Installation And Operation Manual

56
PMEN0645 rev.0 - 04/2023
7
REMOVING THE COVERS
MAINTENANCE
7.1 Removing the covers
If it is necessary to access to the indoor unit components, please follow these operaons.
7.1.0.1 Removing the indoor unit covers
 NOTE
• Front cover needs to be removed for any task inside the indoor unit.
• Back, le and right covers do not need to be removed.
◆ Removing the indoor unit front cover
1 Remove the 2 screws of the indoor unit front cover.
2 Slide the service cover slightly upward and remove it pulling to back.
! CAUTION
• Pay aenon of no falling o the service cover.
• Take care when removing service cover; the parts inside the unit could be hot.

Hitachi YUTAKI S COMBI Series Specifications

General

Type	Air-to-Water Heat Pump
Energy Efficiency Class (Cooling)	A++
Refrigerant	R32
Operating Temperature Range (Heating)	-20°C to 35°C
Energy Efficiency Class (Heating)	A+++
Integrated DHW Tank	190 liters
Dimensions (Indoor Unit)	Varies by model
Dimensions (Outdoor Unit)	Varies by model
Weight (Indoor Unit)	Varies by model
Weight (Outdoor Unit)	Varies by model
Operating Temperature Range (Cooling)	+10°C to +46°C