Version 1.1, 09/2020. Copyright 2012 Hitron Technologies
22
Version 1.1, 09/2020. Copyright 2020 Hitron Technologies
22
Hitron CODA-551x User’s Guide
To reset the CODA-551x, press and hold the RESET button for ten seconds, or go to
the Admin > Device Reset screen and click Factory Reset (see
The Admin: USB
Storage Screen on page 100). The CODA-551x turns off and on again, using its
factory default settings.
NOTE: Depending on your CODA-551x’s previous configuration, you may need to
re-configure your computer’s IP settings; see IP Address Setup on page 17.