Version 1.1, 09/2020. Copyright 2012 Hitron Technologies
19
Version 1.1, 09/2020. Copyright 2020 Hitron Technologies
19
Hitron CODA-551x User’s Guide
NOTE: If your CODA-551x is not using the default IP address, enter an IP address
and subnet mask that places your computer in the same subnet as the
CODA-551x.
7 Click OK. The Internet Protocol (TCP/IP) window closes. In the Local Area
Connection Properties window, click Close.
Your computer now obtains an IP address from the CODA-551x, or uses the IP
address that you specified, and can communicate with the CODA-551x.
1.5 Logging in to the CODA-551x
Take the following steps to log into the CODA-551x’s GUI.
NOTE: If you did not already complete the EasyConnect setup wizard (see
EasyConnect on page 23) you will be prompted to do so before you can log
in.
1 Open a browser window.
2 Enter the CODA-551x’s IP address (default 192.168.0.1) in the URL bar. The
Login screen displays.
Figure 4: Login
3 Enter the Username and Password. The default user name is cusadmin and
the password is the same as the password you configured for the wireless
network in the EasyConnect wizard (see EasyConnect on page 23).