Version 1.1, 09/2020. Copyright 2012 Hitron Technologies
85
Version 1.1, 09/2020. Copyright 2020 Hitron Technologies
85
Hitron CODA-551x User’s Guide
5.2.2 The Wireless: Basic Settings: 5G Screen
Use the 5GHz network screen to enable 5GHz wireless clients to connect to the
CODA-551x.
Click Wireless > Basic Settings > 5G. The following screen displays.
Encrypt Mode Select the type of encryption you want to use on the
2.4GHz network. The options that display depend on the
options you selected in the other fields in this screen.
Select AES to use the Advanced Encryption
Standard.
Select TKIP to use the Temporal Key Integrity
Protocol.
Select TKIP/AES to allow clients using either
encryption type to connect to the CODA-551x.
NOTE: Use of the TKIP encryption standard limits the
wireless network speed to 54Mbps (802.11g
speed).
Password Enter the security key or password that you want to use
for the 2.4GHz wireless network. You will need to enter
this key into your wireless clients in order to allow them
to connect to the network.
Save Changes Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
Table 23: The Wireless: Basic Settings: 2.4G Screen (continued)
To Next Page
Loading...
Need help?
General
