Hitron CODA-551x User Manual

Version 1.1, 09/2020. Copyright 2012 Hitron Technologies
87
Version 1.1, 09/2020. Copyright 2020 Hitron Technologies
87
Hitron CODA-551x User’s Guide
Wireless Mode Select the type of 5GHz wireless network that you want
to use:
802.11a only: use IEEE 802.11a.
802.11n only: use IEEE 802.11n.
802.11a/n mixed: allow clients using both IEEE
802.11a and IEEE 802.11n to access the network.
802.11ac only: use IEEE 802.11ac.
802.11a/n/ac mixed (default): allow clients using
and of IEEE 802.11n, IEEE 802.11ac, or IEEE
802.11a to access the network.
802.11a/n/ac/ax mixed (default): allow clients
using and of IEEE 802.a, IEEE 802.11n, IEEE
802.11ac, IEEE 802.11ax to access the network
NOTE: Only wireless clients that support the network
protocol you select can connect to the wireless
network. If in doubt, use 802.11a/n/ac/ax Mixed
(default).
Channel Bandwidth Use this field to configure the width of the radio channel
the CODA-551x uses to communicate with its wireless
clients on the 5GHz network. Using the full 80MHz
bandwidth can double your data speed, in comparison
to the 40MHz bandwidth.
Select 20 MHz to only use a 20 megahertz band.
Select 40 MHz to use a 40 megahertz band (only
clients supporting IEEE 802.11n and IEEE
802.11ac may connect).
Select 80 MHz to use an 80 megahertz band (only
clients supporting IEEE 802.11ac may connect).
Table 24: The Wireless: Basic Settings: 5G Screen (continued)

Hitron CODA-551x Specifications

General

Brand	Hitron
Model	CODA-551x
Category	Gateway
Language	English