Deutsch / English / Français / Español / Italiano / Nederlands / Polski
-61-
3. Power display: After powering on, the dashboard lights up to display the power, and the power is
divided into 5 grids, corresponding to high, medium and low power.
4. Headlights: refer to Picture 3, long press the button to turn on/off the headlights.
5. Start: power-assisted riding, short press to adjust to 1st gear after power on, step on the
bicycle sprocket, start the motor to assist. If motor assistance is not required, turn off the power or
turn off the battery or set the gear to 0.
The motor provides you with power when you pedal. You can set the required speed level via the display.
The maximum assisted speed of an electric motor is 25 km/h.
Motor
Battery
The electric assist transmission requires a battery for energy support. The battery is located under the frame.
The battery can be charged by removing it from the frame using a suitable spanner.
Only use the supplied charger to charge the battery. The battery is equipped with the following connections
and indicators:
· Charging socket
· Switch button
· Lock for locking the battery
To Next Page
Loading...
