How to fix HME Headsets when only intermittent voice can be heard?
If you're experiencing intermittent voice issues with your HME headsets, consider the following: 1. Ensure the antennas are securely screwed onto the base station. Check the transmitter antenna cable connections at ANT1 and ANT2 on the left side of the transceiver circuit board. 2. Reduce the VAA level, as it might be too sensitive.
Why is there no sound in my HME Headsets when I speak into the microphone?
If you can't hear any sound in your HME headsets when speaking into the microphone, there might be a few reasons: * The headset might not be powered on. Try pressing the power button on the headset. * The volume could be set too low. Adjust the volume using the Volume-up and down buttons. * The battery may be low or defective. Check the headset power light; if it's not lit, replace the battery. * The headset may not be registered. In this case, you should register the headset.
To Next Page
General
