Hobart 1712 Manual

UK. SERVICE TRAINING CENTRE
Warning this information is for HOBART STILL trained personnel only.
Reproduction of this information is prohibited without the written consent of HOBART STILL.
Page: 3
02/95
1712
Problem?
Carriage transmission sticks in
high speed position.
Check as follows:-
1. Press the diving key boss
towards the shaft (see pic
above). If the diving key boss
disengages from the shaft,
replace the diving key, if not
look elsewhere for the prob-
lem.
Diving key = 435543
Shaft = 293036
Order both these items in the
case of replacement.
CARRIAGE TRANSMISSION - SERVICE
OIL = EP 460 (284 ml)
Plugs

Hobart 1712 Specifications

General

Category	Slicer
Operation	Manual
Power	Electric
Material	Stainless Steel
Blade Diameter	12 inches
Voltage	110V
Phase	Single
Blade Size	12 inches