To Next Page

To Previous Page

– 3 –

123456789012345678901234567890121234567890

2345678901234567890123456789012123456789

123456789012345678901234567890121234567890

Installation, Operation and Care of

MODEL D340 MIXERS

SAVE THESE INSTRUCTIONS

GENERAL

The D340 Mixer is a medium-duty mixer which develops 1

/2 horsepower and features a timer, thermal

overload protection and a #12 Attachment Hub as standard equipment. A variety of agitators are

available for use on either the standard 40-quart bowl or the optional 30-quart bowl. A special 20-quart

bowl and agitators are available options.

Programmable Timer Controller is optional on D340 models.

A variety of attachments and accessories are available for all mixers. These are described in a

separate

Use and Applications Handbook,

which is furnished with each mixer.

INSTALLATION

UNPACKING

Immediately after unpacking the mixer, check for possible shipping damage. If this machine is found

to be damaged, save the packaging material and contact the carrier within 15 days of delivery.

Prior to installation, test the electrical service to assure that it agrees with the specifications on the

machine data plate.

LOCATION

Place the mixer in its operating location. There should be adequate space around the mixer for the user

to operate the controls and to install and remove bowls. The area above the mixer should allow the top

cover to be removed for routine maintenance and servicing.

Holes are provided in the base for permanent bolting to the floor, although this is not necessary in normal

installations. Four plastic plugs are supplied with the mixer to plug these holes if they are not used.

D340 Mixer Technical Manual Page 9 of 67

Hobart D340 Technical Manual

Other manuals for Hobart D340