EN
BA-21426-002-EN 06.08.2010 7
6
57
124 3
10
89
➀
ON/OFF button Pushing this button switches the machine on.
As soon as the machine is ready for operation, the wash cycle is started by
pushing this button also.
By pushing and holding (3 seconds) this button, the drain and self cleaning
cycle starts. At the end of the cycle, the machine switches off automatically.
After switch off, the machine is not voltage free!
Furthermore, the button illuminates to indicate the mode of the machine:
GREEN = Machine is ready for operation
BLUE = Wash cycle is running
RED (permanently) = Failure indication (see section 7.)
GREEN/RED (alternating) = Failure indication (see section 7.)
The status of the program is indicated by the color change of the four button
segments:
Filling increaslingly GREEN
Draining decreasingly GREEN
Washing from BLUE back to GREEN
➁
Program button By pushing this button, it is possible to select between different preset pro-
grams, according to the model and equipment.
The program no. (e.g. P02) will be shown in the display
➅
.
➂
No function.
➃
Stop button In case of operating error or faults, it is possible to switch-off the
machine immediately without the drain cycle, by pushing this button.
After switch off, the machine is not voltage free!
➄
Display e.g. temperature indication Wash (°C) (see section 6.)
➅
Display e.g. temperature indication Rinse (°C) (see section 6.)
➆
Salt required Indicating the need for regeneration salt to be added.
(Only with built-in softener.)
➇
Detergent/Rinse Aid indicator Indicates detergent or rinse aid deficiency.
➈
Hygiene indicator Indicates that a hygiene cleaning should be carried out (see section 5.4.).
➉
Service indicator Indicates that the machine has a fault (see section 7.).
2. CONTROLS
To Next Page
Loading...
