Hobart FX series - Start-Up; Detergent; Rinse Aid

8 06.08.2010 BA-21426-002-EN
EN
3. START-UP
Attention:
Use only commercial detergent and rinse aid. Please pay
attention to the manufacturers safety instructions.
3.1. DETERGENT
Attention:
Do not use any acidic detergent products with the built-in deter-
gent pump! (The ph-value has to be higher than 7.)!
– Place the suction hose into the detergent container.
– Fill the suction hose according to section 3.4.
– The dosing pump can operate to a max. head height of 1.5 m.
MACHINES WITH INTEGRATED DETERGENT CONTAINER
(OPTION):
– Open the container and fill it with detergent up to the marking
“MAX” by using a funnel. Do not overfill the container!
3.2. RINSE AID
– Place the suction hose into the rinse aid container.
– Fill the suction hose according to section 3.4.
– The dosing pump can operate to a max. head height of 1.5 m.
MACHINES WITH INTEGRATED RINSE AID CONTAINER
(OPTION):
– Open the drawer and fill the integrated reservoir with rinse aid up to
the marking “MAX”.