Built-in devices
10-16
Error messages
Error messages are shown on the display
(panel in idle state).
Battery low: if voltage sinks to under 10.5V,
the heating system will switch
off. Automatic reset to above 11V.
Fan failure:
incorrect fan speed. Automatic
reset after 5 minutes.
Gas failure:
gas bottle is empty. Reset by
switching off or restart.
Overheating is red:
to reset, interrupt the 12V electric power
supply and connect it again.
Overheating is blue:
to reset, interrupt the 12V electric power
supply and connect it again.
Window is open:
the heating system interrupts
the gas supply when thewindow is open.
Shut the window.
Connection failure:
connection error between the heating
system and the panel. Switch the main
voltage off and then on again.
Panel failure 1:
panel error
Panel failure 2: panel error
To Next Page
