Built-in devices
10-17
10.5
Auxiliary Heating in the Driver's Cab
(Optional Extra)
This heating unit is integrated in the water circuit; electric
power is supplied by means of the 12V modular battery.
Function
The heating function is set manually using the switch in the
driver's cab.
Set the switch to position
j
to heat the driver's cab.
Set the switch to position
k
if you prefer to heat the motor;
this will, however, also preheat the interior.
1
2
Please refer to the separate operating instructions for the
„Alde Compact 3010“ for more detailed information on the
operation, use and upkeep of the hot-water heater.
1
Wash room
Since the convector heater in the wash room must be moun-
ted behind the external panel and, therefore, there is no gu-
arantee that the air can circulate sufciently, a fan has been
provided to circulate the hot air in the room. This fan can be
activated in two stages using the switch
j
.
To Next Page
Loading...
