Interior Structure
06-13
Converting the Transverse Seat
In order to use the additional bed in the rear, the transverse
seat must be converted.
Conversion
• Remove the seat and back cushions.
• Lower the pillared table.
• Fold the cushion
j
cover forward by 180° and place it
on the pillared table.
1
Widening the beds (Optional Extra)
In those models with individual beds above the rear garage,
the two beds can be widened or joined by folding out an
additional plank.
• Open the ap
j
under the additional plank and take out
the access ladder.
• Fold the additional plank
k
forward and hook the access
ladder securely into the appropriate holes.
• Place the two additional cushions on the surface.
1
2
To Next Page
Loading...
