9
CLOSED LOOP & LEARN
CLOSE LOOP ENABLE / DISABLE:
The Closed Loop Enable / Disable menu turns Closed Loop “On” and “Off”. If enabled, the fuel table will be
modified based on target AFR vs Actual Wideband AFR.
LEARN ENABLE / DISABLE:
The LEARN Enable / Disable menu turns the Self Tuning “On” and “Off”. If enabled, self-tuning is performed.
Learning should be enabled when an engine is just started and the tuning process is occurring. After the
vehicle is driven under various operating conditions, and is running well, it is advised to disable learning, OR
slow the Learn Speed to “Slow”.
To Next Page
Loading...
