2
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 5/4/06
HOLMS INDUSTRI AB
MOTALA SWEDEN
HOLMS 300
Foreword
This manual is intended to be a guide for correct use
and maintenance of the equipment. Study the manual
before starting up and operating or before any preven-
tion maintenance is carried out.
Be confident with the equipment and all the instruc-
tions and keep the manual so it will always be used be-
fore taking the equipment into operation.
OBS! This manual is made to suit all our markets.
There might be some differences and if this is the case
for you, please do not take notice.
We are continuously working on improvements and we
reserve the right to make design changes and improve-
ments without notice.
The operator is obliged to:
- Look after ev. warning signs to be readable.
- See to that no unauthorized person uses the equip-
ment or is within the operating area during work or
maintenance work
- Check that the carrier is appropriate to the attachment
(hydraulic flow, stability etc.)
When ordering spare parts or by other contacts with
Holms or your local dealer, always inform about the at-
tachment type and series No. This number you will find
on the machine plate.
When ordering packing set for hydraulic motors inform
about the motors serial number. This number you will
find on the gable of the motor.
CONTENT: PAGE:
Product facts 3
Generally 4
Operator instruction 5-6
Connecting to carrier
5
Sweeper setting,
height and tilt
5
Setting of ground pressure
6
Emptying the waste container
6
Disconnecting from carrier
6
Dust control 7
Side brush
(extra equipment)
7
Maintenance 8
Important safety
regulations
8
Change of brushes 8-10
Dismounting of sweeper roll
8
Change of brushes
9
Mounting of sweeper roll
10
To Next Page
Loading...
