4
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 5/4/06
HOLMS INDUSTRI AB
MOTALA SWEDEN
HOLMS 300
Generally
Holms 300 is a pick up sweeper adapted to front mounting
on wheel loaders or tractors. The sweeper operates with
two direct acting hydraulic motors which can be delivered
in two sizes, 2000 motors (195 cm³) made for an oil flow of
40-130 l/min, or 4000 motors (311 cm³) made for an oil
flow of 70-200 l/min.
The waste container is manufactured in two different
sizes. Machines with a roller brush width of 2,0-2,2 have
a waste container with an effective sweeping volume of
360 l, but those with 2,5-3,0 m width have a capacity of
680 l.
The suspension of the sweeper gives a constant and
evenly applied pressure against the ground. This gives
minimal brush wear and insensitiveness to unevenness,
grooves, kerb stones etc.
Holms 300 is in standard design equipped with a 400 l.
water tank and an electric driven water pump.
The attachment hooks are attached by screws to the
chassis which makes side shift possible, and it´s also easy
to shift between different carriers.
Do not make any modifications, changes, rebuilt work etc.
which are not approved by Holms Industri AB. We also ask you to
pay attention to spare parts not approved by us.
2. Holms 300
To Next Page
Loading...
