Holux M-1200 User Manual (English)

Other manuals for Holux M-1200

Questions and Answers:

L
Lisa BradleyAug 11, 2025
What to do if my Holux M-1200 has no GPS output but the timer is running?
- T
  Todd PalmerAug 11, 2025
  If your Holux GPS timer is counting but there's no GPS output, it could be due to a weak or nonexistent GPS signal. Try testing the device under an open sky at a fixed location and run the Mini GPS Viewer “Cold start” function. Another possibility is that the ephemeris and almanac data in the GPS memory is outdated. In this case, remove the battery for 3 seconds, re-insert it, and power the device on again to test.
J
Jasmine WeaverAug 18, 2025
What to do if I can't open the COM port on my Holux GPS?
- W
  William PalmerAug 19, 2025
  If you can't open the COM port on your Holux GPS, it might be because the Bluetooth connection is interrupted, or the COM port is being used by other programs. Check the Bluetooth connection and close any other programs that might be conflicting with the COM port.
N
Nicole HannaAug 25, 2025
Why does my Holux M-1200 'Execute fail'?
- B
  Bryan EspinozaAug 26, 2025
  If your Holux GPS shows 'Execute fail', it could be due to an unstable Bluetooth function. Try turning the Holux GPS off and on again. Also, restart your PDA or PC and reconnect, referring to section 5.2 “Bluetooth device connection installation”.
J
John ParkerSep 1, 2025
What to do if I can not find M-1200XX Holux GPS?
- J
  Jacob NewmanSep 1, 2025
  If you can't find the M-1200XX Holux GPS, it might be due to a poor Bluetooth connection. Restart your PDA or PC and refer to section 5.2 “Bluetooth device connection installation”.

Holux M-1200 Specifications

General

Type	GPS Receiver
Battery Life	Up to 20 hours
Operating Temperature	-10°C to 60°C
Chipset	SiRF Star III
Channels	20
Update Rate	1 Hz
Bluetooth	Yes
Storage Temperature	-20°C to 70°C
Connectivity	USB, Bluetooth
SBAS	WAAS, EGNOS, MSAS
Battery	Li-ion
Acquisition Time	Hot start: < 1 s
Interface	Bluetooth
Humidity	5% to 95% (non-condensing)