What to do if my Holux M-241 GPS cannot open the COM port?
If your Holux GPS cannot open the COM port, it may be due to a Bluetooth connection interruption, or the COM port is being used by another program. Check the Bluetooth connection and close any other programs that might be using the COM port.
Why does my Holux M-241 GPS Bluetooth execute fail?
If your Holux GPS Bluetooth execution fails, it could be due to an unstable Bluetooth function. Try turning the M-241 device off and on. Restart your PDA or PC and refer to section 10 'Bluetooth device connection installation' to reconnect.
General| Chipset | SiRF Star III |
|---|---|
| Channels | 20 |
| Update Rate | 1 Hz |
| WAAS/EGNOS support | Yes |
| Battery Life | Up to 20 hours |
| Data Logging | Yes |
| Connectivity / Interface | USB |
| Operating Temperature | -10°C to 60°C |
| Storage Temperature | -20°C to 70°C |
| Type | GPS Receiver |
| Battery | Rechargeable Li-ion battery |
| Memory | 4MB |
| Acquisition Time | Hot start: 1 sec |
To Next Page
