6
5、Remote control button function and operation instructions
· Start---Function：Start the treadmill
Operation instruction：The computer in standby mode,press the button to start the treadmill.
· Stop---Function: Stop the treadmill
Operation instruction:Press this button at any time to stop the treadmill
·Speed “+”/“-” buttons---Function：Speed value adjustment at run time
Operation instruction: When start the treadmill, press the “+”, “-” buttons to adjust the speed by
0.1km each time.
·Power button--- Function：Turn off/on display in standby mode
Operation instruction: In standby mode,press the button to turn off the display and enter the
sleep mode,then press the button to turn on the display.
6、Description of movement mode
A、Manual mode function
Enter manual mode： When computer is fully powered on,it enters the initial standby
mode,then press start button to enter the manual mode.
Operation instructions: The initial running speed is 1KM/H, time, distance window is
counting from zero, pressing speed
Adjust button，Adjustable running speed value.
Notice: The exercise time is more than 100 minutes, the system will not automatically stop
7、Sleep function description:
When the treadmill stops running, it will go to sleep without any operation for more than 10
minutes.，LED window and corresponding indicator off display,press power button to wake up the
computer,and then re-enter the initial standby mode after full display.
To Next Page
Loading...
