17
Follow the steps below to set the timer to turn on or turn off the
air conditioner automatically.
1. Press the TIMER ON button. The remote control screen
shows “TIMER ON”, and then shows an “H” and the last
memorized auto-on time.
2. Press the TIMER ON button repeatedly to reset the auto-on
time. The set time will increase in half-hour increments within
0-10 hours and in one hour increments within 10-24 hours.
3. After the time is set, there will be a one second delay
before the remote control transmits the signal to the air
conditioner. After another 2 seconds, the signal “H” will
disappear, then the set temperature will resume on the
display, and the “TIMER ON” indicator lights up, indicating
that the timer is set successfully.
1. Press the TIMER OFF button. The remote control screen
shows “TIMER OFF”, and then shows an “H” and the last
memorized auto-off time.
2. Press the TIMER OFF button repeatedly to set the auto-off
time. The set time will increase in half-hour increments
within 0-10 hours and in one hour increments within 10-24
hours.
3. After time is set, there will be a one second delay before the
remote control transmits the signal to the air conditioner.
After another 2 seconds, , the signal “H” will disappear, then
the set temperature will resume on the display, and the
“TIMER OFF” indicator lights up, indicating that the timer is
set successfully.
WARNING
• When you set the timer, the remote control transmits the
remote control within the receiving range of 20ft.
• The effective operation time set by the remote control for the
3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10,
11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, and 24 hours.
Operating Instructions
2
1
MODE
FAN
TEMP
ON/OFF
TIMER
ON
TIMER
OFF
SILENCE
FP
LED FOLLOW
ME
TURBO SELF
CLEAN
SWING DIRECT
SLEEP
To Next Page
Loading...
