61
Restore factory settings
8 Restore factory settings
The factory settings of the device can be restored.
If you do this, you will lose all your settings.
To restore the factory settings of the device, proceed as
follows:
• Press and hold down the system button (A) for 4
seconds until the LED (A) quickly starts flashing
orange (see figure 13).
• Release the system button.
• Press and hold down the system button again
for 4 seconds, until the LED lights up green (see
figure 14).
• Release the system button to finish the procedure.
The device will perform a restart.
9 Maintenance and cleaning
The product does not require any maintenance.
Enlist the help of an expert to carry out any
maintenance or repairs.
The mains voltage must be disconnected before
the device is removed (trip the miniature circuit-
breaker). Only qualified electricians (to VDE 0100)
are permitted to carry out work on the 230 V
mains.
To Next Page
Loading...
Need help?
General
