Homematic IP HmIP-DRDI3 - 3 Function and Device Overview

47
Function and device overview
3 Function and device overview
The Homematic IP Dimming Actuator – 3 channels can
be easily installed on a DIN rail within a distribution board.
Once installed, it switches and dims connected luminaries
via three potential-free, independent channels.
In the Homematic IP system, the dimming actuator can
switch and dim the connected luminaries comfortably via
connected wireless push-buttons, remote controls or via
the free Homematic IP Smartphone app. Furthermore,
direct operation can be realised via connected
conventional push-buttons or switches.
The dimming actuator enables dimming of
• normal incandescent lamps,
• high-voltage halogen lamps,
• low-voltage halogen lamps with electronic
transformers,
• dimmable energy-saving lamps
*1
and
• dimmable LED lamps
*2
.
*1
The usable dimming range is usually extremely restricted.
*2
It is not guaranteed that the dimming behaviour will be
performed correctly with any kind of LED lamps.