Need help?Do you have a question about the HomeMatic CCU2 and is the answer not in the manual?
Identifies and describes the purpose of each port and indicator on the CCU2 unit.
Step-by-step guide for mounting the CCU2 unit securely on a wall.
Instructions for connecting the CCU2 to a DSL router or cable modem.
Guidance on safely connecting the CCU2 to a power source using the AC adapter.
Steps to access and launch the HomeMatic WebUI via a web browser.
Identifies and describes the purpose of each port and indicator on the CCU2 unit.
Step-by-step guide for mounting the CCU2 unit securely on a wall.
Instructions for connecting the CCU2 to a DSL router or cable modem.
Guidance on safely connecting the CCU2 to a power source using the AC adapter.
Steps to access and launch the HomeMatic WebUI via a web browser.
General| Processor | ARM9 |
|---|---|
| CPU | 400 MHz |
| RAM | 64 MB |
| Flash Memory | 128 MB |
| Interfaces | Ethernet, USB |
| Power Supply | 5 VDC |
| Radio Frequency | 868.3 MHz |
| Model | CCU2 |
| Category | Control Unit |
| Operating System | Linux |
| Manufacturer | eQ-3 |
| Wireless Protocols | Homematic |
| Ethernet | 10/100 Mbit/s |
| USB Ports | 1 |
To Next Page