＊
−
＊
System
Status
ON
OFF
ON/OFF
OFF
Multi-Information
Display Message
BSI Indicator Description
When you push the BSI OFF button, a BSI ON or OFF message is displayed on the multi-
information display for about 5 seconds.
The BSI indicator will remain on while the system is off.
A chime sounds to indicate that the system has been turned ON or OFF.
If while driving, mud, snow, or ice accumulates in the vicinity of sensor:
The system may shut down
The BSI indicator illuminates, a message is displayed on the multi-information display, and a
chime sounds.
The BSI indicator will turn off and the system will return to normal once the obstacle is removed,
and you begin to drive.
Always keep the area around the radar sensors clean. BSI may not operate properly if the sensors
are obstructed.
The BSI alert indicator:
May come on when a vehicle enters one of the alert zones, even if this message is displayed.
May not come on due to obstruction (splashes, etc.) even if this message is not displayed.
: System status may remain on even when the BLIND SPOT NOT AVAILABLE message is
displayed.
If the system is faulty, the BSI indicator illuminates and a message is displayed on the multi-
information display.
Have your vehicle inspected by your Honda dealer.
Blind Spot Information System (BSI)
BSI Status Displays
586
10/07/17 10:53:01 31TK8600_591
To Next Page
Loading...
Need help?
General
