67
TECHNICAL INFORMATION
Problems That May Affect
Emissions
If you are aware of any of the
following symptoms, have your
engine inspected and repaired by
your servicing dealer.
• Hard starting or stalling after
star
ting.
• Rough idle.
• Misfiring or backfiring under load.
• Afterburning (backfiring).
• Black exhaust smoke or high fuel
co
nsumption.
Replacement Parts
The emission control systems on your
Honda engine were designed, built,
and certified to conform with EPA
and California emission regulations.
We recommend the use of Honda
Genuine parts whenever you have
maintenance done. These
original-design replacement parts are
manufactured to
the same standards
as the original parts, so you can be
confident of their performance. The
use of replacement parts that are not
of the original design and quality may
impair the effectiveness of your
emission control system.
A manufacturer of an aftermarket part
assumes the
responsibility that the
part will not adversely affect
emission performance. The
manufacturer or rebuilder of the part
must certify that use of the part will
not result in a failure of the engine to
comply with emission regulations.
Maintenance
Follow the maintenance schedule on
(p. 40 and 41). Remember that this
schedule is based on the assumption
that your machine will
be used for
its designed purpose. Sustained
high-load operation, or use in unusual
condit
ions, will require more
frequent service.
31ZW66320.book 67 ページ ２０１３年１０月４日 金曜日 午後３時４８分
To Next Page
