31
Other Checks
Check the following items:
The possibility of corrosion
damage is increased if the anode
metal is painted over or allowed to
deteriorate.
PRE-OPERATION CHECKS
(4)
(2)
(1)
(3)
(6)
The steering handle for
impaired operation.
The stern bracket for damage and
looseness.
The tool kit for missing spare parts
and tools.
The anode metal for damage,
looseness or excessive corrosion.
The anode metal helps to protect the
outboard motor from corrosion
damage; it must be exposed directly
to the water whenever the motor is in
use. Replace the anode metal when it
has been reduced to approximately
one half of its original size.
Required information regarding
boating laws and regulations.
Spare spark plugs, engine oil,
propeller, shea r pin and cotter pin.
Tool kit
Owner’s Manual
Parts/materials which should be
installed on board:
The propeller and cotter pin for
damage or looseness.
The fuel line for kinking,
collapsing or a loose connection.
(6)
(5)
(4)
(3)
(2)
(1)
(4)
(3)
(2)
(1)
(page 58)
To Next Page
