#
Brakelight/Taillight
The brakelight and taillight uses several LEDs.
If there is a LED which is not turned on, see
your dealer for servicing.
#
Front/Rear Turn Signal Bulb
1.
Remove the screw and collar.
2.
Remove the turn signal lens.
3.
Slightly press the bulb and turn it
counterclockwise.
4.
Install a new bulb and parts in the reverse
order of removal.
u Use only the amber bulb.
20161220114015_32MJED100_eng_BOOK Page 101 Tuesday, December 20 2016 11:43:47 JST
Electrical Trouble u Burned-out Light Bulb
Troubleshooting
98
Brakelight/Taillight
Turn signal
lens
Screw
Collar
Bulb
To Next Page