Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat
tyre, can be a major inconvenience.
Check the following items before you get on
your motorcycle:
● Fuel level - Fill fuel tank when necessary.
2 P. 39
● Throttle - Check for smooth opening and
full closing in all steering positions. 2 P. 78
● Engine oil level - Add engine oil if necessary.
Check for leaks. 2 P. 61
● Coolant level - Add coolant if required.
Check for leaks. 2 P. 65
● Drive chain - Check condition and slack,
adjust and lubricate if necessary. 2 P. 71
● Brakes - Check operation;
Front and Rear: check brake fluid level and
pads wear. 2 P. 67, 2 P. 68
● Lights and horn - Check that lights,
indicators and horn function properly.
● Engine stop switch - Check for proper
function. 2 P. 34
● Clutch - Check operation;
Adjust freeplay if necessary. 2 P. 75
● Side stand ignition cut-off system - Check
for proper function. 2 P. 70
● Wheels and tyres - Check condition, air
pressure and adjust if necessary. 2 P. 55
20161220114015_32MJED100_eng_BOOK Page 50 Tuesday, December 20 2016 11:43:47 JST
Maintenance
47
To Next Page
Loading...
